GE OEC Miniview MAX Mini C-Arm

Name: GE OEC MiniView Max Mini C-Arm
Brand: GE OEC
SKU: GE-OEC-MiniView-Max
Availability: InStock

Showing Slide 1 of 1: GE OEC MiniView MAX mini c arm

GE OEC Miniview MAX Mini C-Arm

The GE OEC Miniview MAX is GE HealthCare’s premium mini C-arm, built around a 15 cm CMOS flat-panel detector and a 27-inch 4K UHD display. Where the OEC Elite Miniview uses dual 19-inch monitors and a 1.3k x 1.3k detector, the Miniview MAX consolidates viewing into one large high-resolution display and adds features designed for faster, more confident intraoperative positioning: a SmartLock C-arm securing system that locks with a single touch, integrated laser alignment for rapid target centering, and 4X digital zoom without increasing radiation dose. Cine and FluoroStore capture motion sequences alongside still frames, providing a dynamic imaging record for cases where a single held frame does not adequately document a finding. Digital annotation tools allow clinicians to mark images directly on the display. Live and reference images display side by side on the single 27-inch screen. The result is a compact extremity imaging system designed for operating rooms, surgery centers, and outpatient clinics that run high-volume orthopedic and podiatric caseloads and require fast, precise positioning across diverse procedure setups. Minicarm.com is the primary independent source for certified-refurbished OEC Miniview MAX systems, OEM parts, and nationwide on-site service.

Minicarm.com provides certified-refurbished GE OEC Miniview MAX units, OEM parts, and nationwide on-site service from factory-trained technicians.

Available for sale, lease, or rent nationwide.

1 (800) 643-2998

Key Features and Benefits of the GE OEC Miniview MAX

Feature

Benefit

Feature

15 cm CMOS Flat-Panel Detector

Benefit

The Miniview MAX uses a 15 cm CMOS flat-panel detector that captures X-rays directly on a semiconductor surface, eliminating the optical conversion chain and barrel distortion associated with image intensifiers used in the OEC 6600 and OEC 6800. Flat-panel CMOS detectors produce consistent resolution across the full imaging field including at the edges, and detector performance does not degrade over the system’s lifespan the way image intensifier phosphors do. The 15 cm detector size is optimized for extremity imaging where the clinical field of view is compact and fine structural detail is the priority.

Feature

27-Inch 4K UHD Display

Benefit

Feature

27-Inch 4K UHD Display

Benefit

A single 27-inch 4K UHD monitor delivers substantially more pixels per inch of screen real estate than the dual 19-inch monitors on the OEC Elite Miniview. The larger, higher-resolution display reduces the need to mentally scale small structures and allows side-by-side live and reference image presentation on one screen without shrinking either view to accommodate a divided layout. For facilities where ergonomic display positioning matters, a single large screen eliminates the visual shift between two separate monitors during active procedures.

Feature

4X Digital Zoom Without Increased Dose

Benefit

The Miniview MAX supports up to 4X digital zoom without changing the X-ray technique or increasing patient or operator dose. Zoom is applied post-acquisition through digital processing rather than requiring a second, higher-dose acquisition at a tighter field. For fine-detail confirmation work such as screw thread engagement, cortical margin integrity, and small hardware positioning, 4X zoom provides sufficient magnification to assess findings from a standard-field acquisition without additional radiation events.

Feature

SmartLock C-Arm Securing System

Benefit

SmartLock allows the clinician to lock the C-arm in position with a single touch rather than engaging multiple manual locks. In high-volume procedure environments where the C-arm is repositioned frequently between cases or between views within a case, SmartLock reduces the time and attention required to secure the arm between acquisitions. Reliable single-touch locking also reduces the risk of unintended C-arm drift after positioning, which can require a repeat acquisition if the arm shifts before exposure.

Feature

Laser Alignment

Benefit

An integrated laser projects the center of the imaging field onto the patient or surgical target, allowing the clinical team to position the C-arm accurately without taking a test exposure for alignment confirmation. For facilities that track procedure fluoroscopy time, replacing alignment exposures with a laser reference reduces cumulative dose and speeds per-case setup time. Laser alignment is particularly useful in extremity cases where the imaging field is small and precise centering over a specific joint or hardware component is required.

Feature

Cine and FluoroStore

Benefit

Cine captures fluoroscopic motion sequences as video loops, and FluoroStore retains the fluoroscopy sequence captured during an acquisition so the clinical team can review dynamic motion rather than relying on a single held frame. For cases involving joint range-of-motion assessment, dynamic instability evaluation, or hardware-under-load visualization, a saved sequence provides a more complete record than a single still image. Cine and FluoroStore together give the clinical team a complete dynamic imaging archive alongside standard still-frame captures.

Feature

Digital Annotations

Benefit

Clinicians can mark, measure, or label images directly on the 27-inch display using digital annotation tools. Annotations support intraoperative communication between the surgical team, documentation of measurement findings during procedures, and review sessions where specific findings need to be highlighted for a second viewer. Annotated images are stored with the case record.

Feature

Dual-Side Controls

Benefit

Imaging controls accessible from both sides of the C-arm allow the operator or assistant to adjust parameters and positioning from whichever side procedure setup, sterile draping, or table orientation permits. In procedure rooms where access to one side of the system is blocked by surgical equipment or the sterile field, bilateral controls prevent workflow interruptions during active acquisitions.

Clinical Applications for the GE OEC Miniview MAX

The GE OEC Miniview MAX is optimized for high-volume extremity imaging in operating rooms, ambulatory surgery centers, and outpatient clinics where fast, precise C-arm positioning and high-resolution image capture are the primary requirements. Common applications include:

Orthopedic extremity surgery: fracture reduction, hardware placement, and post-operative alignment confirmation where 4X zoom and 4K display resolution support fine-detail assessment without additional exposures
Podiatric surgery: osteotomy assessment, plate and screw positioning, and post-operative alignment confirmation in foot and ankle procedures
Hand and wrist surgery: fracture evaluation, hardware placement, and articular surface assessment in small joint procedures where the 15 cm field of view is matched to the compact anatomy
Dynamic joint assessment: range-of-motion evaluation and instability assessment using Cine and FluoroStore to capture motion sequences rather than static frames
Pain management procedures: needle guidance for injection procedures where laser alignment reduces alignment exposure time and low-dose imaging supports extended fluoroscopy
Sports medicine: rapid fluoroscopic assessment in sports facilities and high-volume outpatient settings where SmartLock and laser alignment speed case setup between patients

Service and Support for the GE OEC Miniview MAX

GE HealthCare no longer provides direct manufacturer support for the OEC Miniview MAX, and the system’s 15 cm CMOS detector, 27-inch 4K display, SmartLock, and FluoroStore require technicians trained specifically on the Miniview MAX’s imaging and mechanical systems. For practices purchasing refurbished systems, Minicarm.com is the primary independent service provider. 85% of issues are resolved through our 24/7 phone and video support line. When on-site service is needed, certified factory-trained technicians respond within 24 to 48 hours in most U.S. metro areas.

Certified Refurbishment Process

Every GE OEC Miniview MAX sold by Minicarm.com goes through a certified refurbishment performed by factory-trained technicians. The process covers CMOS flat-panel detector calibration, SmartLock mechanism function, laser alignment calibration, 27-inch 4K UHD display function and calibration, Cine and FluoroStore software verification, dual-side control function, C-arm mechanical and rotation integrity, electrical safety, software verification, and full cosmetic restoration.

Warranty and Service Contracts

Standard refurbished sales include a 12-month parts and labor warranty. Extended service contracts (24, 36, and 60 months) are available with options for on-site response, loaner equipment during repair, and annual preventive maintenance.

In-Service and Training

In-person or virtual training is available to help your team use the Miniview MAX’s SmartLock system, laser alignment, Cine and FluoroStore capture, digital annotation tools, and 4X zoom effectively across your procedure mix.

OEM Parts Availability

Minicarm.com maintains an independent inventory of OEM GE OEC Miniview MAX parts, including flat-panel detector components, display assemblies, SmartLock mechanism parts, and imaging electronics. Parts ship overnight to minimize downtime for active clinical systems.

Request Mini C-Arm Service, Repair or Maintenance

Request GE OEC Miniview MAX Service Manual

How the GE OEC Miniview MAX Compares to Other GE OEC Mini C-Arms

Spec	OEC Miniview MAX	OEC Elite Miniview	GE OEC 6800	GE OEC 6600
Detector type	15 cm CMOS flat panel	CMOS flat panel, 1.3k x 1.3k	6-inch image intensifier	6/4-inch image intensifier (dual field)
Display	27-inch 4K UHD (single)	Dual 19-inch	Dual 16-inch touchscreen	Standard display
Zoom	4X digital (no dose increase)	Standard	Standard	Standard
C-arm lock	SmartLock (single touch)	Standard	Standard	Standard
Alignment	Laser	Standard	Standard	Standard
Motion capture	Cine + FluoroStore	Standard	Last image hold	Last image hold
DICOM	Contact for details	Wireless	Contact for details	Contact for details
Vascular imaging	No	No	Yes	No
Best for	Premium extremity imaging	High-res multi-specialty with DICOM	Multi-specialty including vascular	Versatile multi-specialty
Price range (refurbished)	$45,000 to $70,000	$15,000 to $65,000	$12,000 to $20,000	$11,000 to $12,500

Looking at other GE OEC options? See the GE OEC Elite Miniview, GE OEC 6800, or GE OEC 6600.

How the GE OEC Miniview MAX Compares to Other Portable Fluoroscopy Systems

Spec	GE OEC Miniview MAX	Hologic Premier Encore	Orthoscan FD Pulse
Detector type	15 cm CMOS flat panel	6/4-inch CsI image intensifier	Flat-panel detector
Display	27-inch 4K UHD (single)	Dual 15-inch SVGA Portrait Mode	Standard display
Zoom	4X digital (no dose increase)	No	Standard
C-arm rotation / lock	SmartLock single-touch, laser alignment	360° iso-centered, counterbalanced	Standard
Motion capture	Cine + FluoroStore	High-speed mode, last image hold	Last image hold
Metal-Trac	No	No	No
Best for	Premium extremity with 4K display, SmartLock, and Cine	Premium extremity with 360° iso-centered rotation and CsI intensifier	Flat-panel extremity with pulse mode

Looking at non-OEC alternatives? See the Hologic Premier Encore or the Orthoscan FD Pulse.

GE OEC Miniview MAX Technical Specifications

Imaging System

Imaging Features

C-Arm Mechanics and Positioning

Need a full datasheet? Request the GE OEC Miniview MAX service manual from Minicarm.com.

GE OEC Miniview MAX Pricing and Purchase Options

BUY a Refurbished GE OEC Miniview MAX

Refurbished GE OEC Miniview MAX systems are priced from $45,000 to $70,000, depending on hours of use, cosmetic condition, configuration, and included accessories. Every refurbished system ships with a 12-month parts and labor warranty and is rebuilt with OEM parts by factory-trained technicians. Call (800) 643-2998 for current availability and exact pricing.

LEASE a GE OEC Miniview MAX

Lease terms run 24, 36, or 60 months with end-of-term purchase options. Operating leases keep the equipment off your balance sheet; capital leases qualify for Section 179 depreciation.

RENT a GE OEC Miniview MAX

Mini C-Arm Rentals are available to accommodate evaluation before purchase, temporary coverage during a primary system repair, and short-term case volume. Monthly rental rates start in the low four figures.

Estimate monthly revenue and break-even timeline using our Clinical Reimbursement Calculator

Review our Mini C-Arm Buyer’s Guide

Learn more about financing options.

Get a GE OEC Miniview MAX Quote

Name(Required)

Email(Required)

Phone(Required)

Company*(Required)

Message(Required)

This field is hidden when viewing the form

Source

This field is hidden when viewing the form

Medium

This field is hidden when viewing the form

Campaign

This field is hidden when viewing the form

Content

Have questions? Talk to Minicarm.com’s GE OEC experts about pricing, financing, service contracts, parts availability, and trade-in options for the Miniview MAX.

Call: (800) 643-2998
Email: info@minicarm.com

The Minicarm.com Difference

Minicarm.com has been the leading independent source for GE OEC mini C-arm sales and service in the United States. Our factory-trained technicians have extensive hands-on experience with the OEC Miniview MAX’s CMOS flat-panel detector, SmartLock system, laser alignment, and Cine imaging capabilities, and we carry the OEM parts inventory to support active clinical systems nationwide.

Common Questions About the GE OEC Miniview MAX

What is the difference between the GE OEC Miniview MAX and the OEC Elite Miniview?

What is SmartLock and how does it affect workflow?

What is Cine imaging on the GE OEC Miniview MAX, and when is it used?

How does 4X zoom work on the OEC Miniview MAX without increasing dose?

How much does a refurbished GE OEC Miniview MAX cost?

Minicarm.com is not affiliated with or endorsed by GE HealthCare. All product names, logos, and trademarks are the property of their respective owners and used for identification purposes only. GE OEC Miniview MAX pricing, specifications, and availability subject to change. Refurbished mini C-arms are inspected and certified by Minicarm.com under our own quality program, independent of the original manufacturer.