What does the UPS battery backup protect against on the TAU 1515?

The TAU 1515's integrated UPS keeps the system powered through brief power interruptions, fluctuations, and outages. In a surgical setting this means an unexpected power event during an active case does not interrupt imaging, lose unsaved images, or force an abrupt system shutdown. The UPS provides enough runtime to complete the current imaging sequence, save all images, and initiate a controlled shutdown if power is not restored. It also protects the SSD and operating system from corruption caused by sudden power loss.

Orthoscan TAU 1515 Mini C-Arm

Showing Slide 1 of 4

Orthoscan TAU 1515 Mini C‑Arm

The Orthoscan TAU 1515 is the flagship surgical extremity mini C-arm in the current Orthoscan lineup. It combines the full TAU platform with two capabilities not found on any other current-generation Orthoscan: pulsed fluoroscopy and a 15cm x 15cm square CMOS flat panel detector. Pulse rates from 2 to 30 pps reduce radiation dose without sacrificing image quality, while the square detector covers symmetric extremity anatomy in a single field of view. 160 degrees of orbital rotation, and OrthoTouch 2.0 on a 24-inch touchscreen round out a system built for high-volume surgical programs.

The President of Minicarm.com is a co-founder of Orthoscan and our team includes certified Orthoscan technicians with hands-on TAU 1515 platform experience across sales, service, and clinical support.

Available for sale, lease, or short-term and long-term rent nationwide.

1 (800) 643-2998

Key Features and Benefits of the Orthoscan TAU 1515

Feature

Benefit

Feature

15cm x 15cm Square CMOS Flat Panel Detector

The largest detector in the Orthoscan mini C-arm lineup. The square field of view covers 14cm x 14cm at full size and 10.9cm x 10.9cm collimated, with 99-micron pixel spacing and a 42.5-micron focal spot.

Benefit

Full Symmetric Extremity Coverage in a Single Shot

The square field captures hands, wrists, feet, and ankles symmetrically without collimation compromise. Anatomy that requires two exposures on a rectangular detector often fits in one exposure on the TAU 1515, reducing imaging time and cumulative dose.

Feature

Pulsed Fluoroscopy at Five Dose Rates

Continuous, 30, 15, 7.5, and 2 pulses per second. Pulsed fluoroscopy delivers X-ray in brief bursts rather than a continuous beam, reducing dose without changing image acquisition workflow.

Benefit

Significant Dose Reduction Across All Case Types

Lower pulse rates reduce radiation exposure for patients and surgical staff on long fixation cases, pediatric procedures, and multi-view imaging sequences. Surgeons and techs select the lowest pulse rate the case allows without adjusting any other imaging parameters.

Feature

160-Degree Orbital Rotation with Over-Rotation Capability

Full 160-degree orbital arc with over-rotation for extended coverage, paired with 320-degree wig-wag and 430-degree pivot.

Benefit

Every Surgical Projection Without Moving the Patient

The extended orbital range covers lateral, oblique, and AP views from one setup position. Over-rotation gives additional reach for complex anatomy without repositioning the patient or breaking sterile technique.

Feature

Compact Mobile Design

Lightweight, space-saving design allows easy maneuverability and positioning in tight clinical environments.

Benefit

Easy to Maneuver in Tight Spaces

Compact footprint improves workflow efficiency and allows convenient use in smaller procedure rooms.

Feature

Pediatric Dose Filter Plus Pulsed Fluoroscopy

A built-in pediatric dose filter combined with pulsed fluoroscopy gives the TAU 1515 two independent dose-reduction tools for pediatric imaging.

Benefit

The Lowest Achievable Dose for Pediatric Extremity Cases

Applying both the pediatric filter and a low pulse rate together delivers maximum dose reduction for pediatric patients. No other current-generation Orthoscan mini C-arm combines both tools on a single platform.

Feature

OrthoTouch 2.0 with On-Screen Measurements

The OrthoTouch 2.0 interface runs on a 24-inch 1920 x 1200 touchscreen with on-screen measurement tools, DICOM calibration, and cine loop export built in.

Benefit

Measurements at the Point of Care Without Post-Processing

On-screen measurement tools allow surgeons to assess length, angle, and alignment directly on the fluoroscopic image during the procedure. Measurements are calibrated to DICOM and can be saved with the image, reducing the need for separate post-processing or reporting steps.

Feature

Multifunction Wireless Foot Switch, Bilateral Controls, Surgical LED Lights

A wireless multifunction foot switch, bilateral sterile field controls on both sides of the C-arm, and surgical LED lights aligned with the imaging axis.

Benefit

Complete OR Workflow Integration From a Single Platform

The wireless foot switch eliminates cord management in the sterile field. Bilateral controls give both scrubbed and non-scrubbed team members independent imaging access. Surgical LEDs keep the anatomy lit through every orbital position without adjusting OR lighting.

See the Orthoscan TAU 1515 in Action

Orthoscan TAU 1515 Mini C-Arm Walkthrough

Hosted by: Christopher Bacon, Co-Founder of Orthoscan and President of Minicarm.com

Read the Full Transcript

Hi, I'm Christopher Bacon, president of Minicarm.com and founder of Orthoscan. Today we're going to do an overview of the Orthoscan TAU 1515.

Powering On
Turn the machine on from the button at the back.

C-Arm Articulation
To release the C-arm, undo the bungee cord. Here is the orbital rotation, the vertical range of motion, and the wig-wag rotation.

Imaging Overview
The TAU 1515 comes with a wireless Bluetooth foot switch. You can use it to X-ray or save images. It also has bilateral two-pad controls on the tube head. We'll use the two-pad controls for this walkthrough.

Press the X-ray button to enter the imaging screen, then hold it down for four to five seconds until you get a clean, stable image, then release.

Two-Pad Controls: Left to Right

Mode button: cycles through continuous fluoroscopy, 30 pulses per second, 15, 7.5, and 2 pps, then back to continuous
Sterile field light toggle: turns the field lights on and off
Cine record: press to begin recording. The icon illuminates to confirm recording is active. When you X-ray with cine record on, the system records video automatically. Playback begins automatically after acquisition. Use the space bar or the on-screen pause button to control playback. You can play forward, play backward, pause, or step through one frame at a time.
Image rotation: rotate counterclockwise or clockwise
Image navigation: scroll through previously acquired images
Tag and freeze: lock an image in the tagged area
Technique adjustment: increase manually, decrease manually, or return to auto

Tagged Image Behavior
When tagged images are locked, the last image hold area does not update with new acquisitions. Unlock the tagged images and the last image hold will resume updating with each new exposure. This is a toggle controlled from the two-pad controls.

On-Screen Controls

Fluoroscopy alarm: 5-minute timer with silence button. Fluoroscopy time display shown alongside.
Copper filter indicator: confirms the filter is engaged
Patient profile indicator: displays the current patient profile (adult or pediatric)
Technique controls: adjust down, adjust up, or return to auto
Save button and print button
Cine loop button
Negate button: inverts the image to an X-ray appearance
Left and right anatomical tags
Edge enhancement: high, low, and off. Low is recommended for most cases.
Pulse mode selector: cycle through pulse rates
Still image, auto, and motion capture modes
Angle tool: set and save C-arm angle references
Brightness and contrast controls with reset button
Tagged image lock: the lock icon turns red when tagged images are locked. Tap to toggle lock on and off.
Case review button: open, review, and manage completed cases. Use the back button to return.
Icon descriptions: tap to see a legend of all on-screen icons
Patient information: enter patient details and select anatomy type
Patient profiles: switch between adult mode and three pediatric modes
Tools and system settings
Home button: returns to the home screen
Magnification mode slider: activate and adjust magnification, then return to standard view
Copper filter toggle: turn the copper filter on or off independently from the patient profile

Shutting Down
Press the green power button at the back of the machine to shut down. Allow the system to fully power down before unplugging.

This has been an overview of the Orthoscan TAU 1515. For sales, support, or service, call (800) 643-2998 or email info@minicarm.com.

Clinical Applications for the Orthoscan TAU 1515

Orthopedic surgery: pulsed fluoroscopy at 2 to 30 pps for dose reduction during long fixation cases, hardware placement, and multi-view intraoperative confirmation
Pediatric orthopedics: combined pediatric dose filter and pulsed fluoroscopy for the lowest achievable dose in pediatric extremity procedures on a current-generation platform
High-volume surgical centers: 160-degree orbital range and five pulse rate options support back-to-back cases across diverse extremity procedure types without protocol changes
Hand and wrist surgery: 15cm x 15cm square detector captures the full hand or wrist in a symmetric field without collimation compromise during open and minimally invasive procedures
Foot and ankle reconstruction: square detector covers the full foot anatomy for complex reconstruction and arthrodesis cases with a single detector placement
Ambulatory surgery centers: current-generation flagship platform with UPS backup for programs that cannot afford imaging interruptions during surgical cases

Service and Support for the Orthoscan TAU 1515

The TAU 1515 is the top of the current Orthoscan surgical extremity lineup, and Minicarm.com is the only independent service provider with certified TAU 1515 platform experience. The President of Minicarm.com is a co-founder of Orthoscan, and our technicians have hands-on TAU 1515 service training across installations, service calls, and preventive maintenance nationwide. Remote resolution handles 85% of calls. When a technician visit is required, we target 24 to 48 hours from the service request.

Certified Refurbishment Process

Every Orthoscan TAU 1515 sold by Minicarm.com is inspected and rebuilt to OEM specification by Orthoscan-trained technicians. Refurbishment covers flat detector performance, pulsed fluoroscopy calibration, OrthoTouch 2.0 software verification, UPS battery performance, laser alignment, brake and wheel system inspection, surgical LED functionality, electrical safety testing, and full cosmetic restoration.

Warranty and Service Contracts

Each refurbished TAU 1515 ships with a 12-month parts and labor warranty. Service contracts at 24, 36, and 60 months are available with on-site response, loaner equipment during repair, and annual preventive maintenance. Coverage is available regardless of where you originally purchased your system.

In-Service and Training

On-site or remote training covers OrthoTouch 2.0 navigation, pulse rate selection, pediatric filter protocol, on-screen measurement tools, DICOM export configuration, and brake and positioning technique for OR and procedure room staff.

OEM Parts Availability

Minicarm.com stocks OEM Orthoscan TAU 1515 components including flat detectors, OrthoTouch display assemblies, UPS battery units, wireless foot switch units, brake components, and surgical LED assemblies, with next-day shipping on most in-stock parts.

Request Mini C-Arm Service, Repair or Maintenance

Request the Orthoscan TAU 1515 Service Manual

How the Orthoscan TAU 1515 Compares to Other Orthoscan Mini C-Arms

Model	Detector	Best For
Orthoscan TAU 1515	15cm x 15cm CMOS flat panel, 1.5k x 1.5k	Current-generation flagship, pulsed fluoroscopy
Orthoscan TAU 1512	15cm x 12cm CMOS flat panel, 2k x 1.5k	Current-generation, standard imaging
Orthoscan FD	6x4-inch flat detector, 2k x 1.5k	Standard surgical extremity
Orthoscan FD OR	6x4-inch CMOS flat panel, 2k x 1.5k	OR-integrated workflow
Orthoscan FD Pulse	15x15cm CMOS flat panel, 1.5k x 1.5k	Lowest dose, longest surgical cases
Orthoscan HD	6/4-inch image intensifier, 1k x 1k	Beach-chair, standing-knee
Orthoscan UC	6/4-inch image intensifier, 1k x 1k	In-office extremity, compact
Orthoscan Mobile DI	6x4-inch flat panel, 2k x 1.5k	Most portable (35 lbs, small footprint)

Orthoscan TAU 1515 Technical Specifications

X-Ray Source

Focal spot: 42.5 microns
kVp range: 40 to 78
mA range: 0.040 to 0.160
Operating modes: pulse and continuous
Pulse rates: continuous, 30, 15, 7.5, 2 pps
Collimator: fixed (normal and magnification)
Pediatric dose filter: included
Magnification mode: yes

Flat Detector

Type: CMOS flat panel
Size: 15cm x 15cm
Resolution: 1.5k x 1.5k
Pixel spacing: 99 microns
Full field of view: 14cm x 14cm
Collimated field of view: 10.9cm x 10.9cm

Monitor and Display

Monitor: 24-inch LCD, 1920 x 1200, 575 cd/m2
Touchscreen: yes
HDMI output: yes (via DVI with HDMI adapter, external monitor supported)
DICOM calibration: built-in
On-screen measurements: yes
Monitor arm horizontal reach: 26 inches
Monitor arm vertical travel: 14 inches
Software interface: OrthoTouch 2.0

C-Arm Mechanics

Orbital rotation: 160 degrees with over-rotation capability
Lateral rotation (wig-wag): 320 degrees
Pivot: 430 degrees
Vertical range: 26.5 inches
Arc depth: 20 inches
Free space: 13.8 inches
Bilateral sterile field controls: yes
Surgical LED lights: yes
Laser alignment: yes

Controls and Brakes

Wireless foot switch: multifunction wireless
Brake system: lock, release, directional
Ground clearance: 4 inches
Keyboard handles: yes

Image Storage and PACS Export

Physical and Power

Need a full datasheet? Request the Orthoscan TAU 1515 service manual from Minicarm.com.

Orthoscan TAU 1515 Pricing and Purchase Options

BUY a Refurbished Orthoscan TAU 1515

Certified-refurbished Orthoscan TAU 1515 systems from Minicarm.com are rebuilt to OEM specification and priced between $60,000 and $72,000, depending on year of manufacture, hours of use, included accessories, and warranty tier. Each unit ships with a 12-month parts and labor warranty. Call (800) 643-2998 for current availability and exact pricing.

LEASE an Orthoscan TAU 1515

Lease terms run 24, 36, or 60 months with end-of-term purchase options. Operating leases keep the equipment off your balance sheet; capital leases qualify for Section 179 depreciation.

RENT an Orthoscan TAU 1515

Orthoscan TAU 1515 mini C-arm rentals are available for both short-term and long-term needs, including coverage during primary system downtime, trial periods before purchase, and ongoing high-volume surgical program support. Monthly rates depend on rental length and configuration.

Estimate monthly revenue and break-even timeline using our Clinical Reimbursement Calculator

Review our Mini C-Arm Buyer’s Guide

Learn more about financing options.

Get an Orthoscan TAU 1515 Quote from Minicarm.com

Name(Required)

Email(Required)

Phone(Required)

Company*(Required)

Message(Required)

This field is hidden when viewing the form

Source

This field is hidden when viewing the form

Medium

This field is hidden when viewing the form

Campaign

This field is hidden when viewing the form

Content

CAPTCHA

Please share your contact information and details about your needs, and one of our medical imaging experts will get in touch with you shortly. Not ready to buy yet or have questions?

Call: (800) 643-2998
Email: info@minicarm.com

The Minicarm.com Difference

The President of Minicarm.com is a co-founder of Orthoscan with direct experience deploying the TAU 1515 into high-volume surgical programs. Our team calibrates the pulsed fluoroscopy and UPS systems as part of every pre-sale inspection.

Common Questions About the Orthoscan TAU 1515

Is the Orthoscan TAU 1515 still in production?

Yes. The TAU 1515 is the current flagship in the Orthoscan surgical extremity mini C-arm lineup and remains in active production. OEM parts, software updates, and manufacturer support are available. Minicarm.com sells certified-refurbished TAU 1515 units and provides independent service contracts for practices that prefer third-party coverage.

What is the difference between the Orthoscan TAU 1515 and the TAU 1512?

Both share the same TAU platform with OrthoTouch 2.0, 160-degree orbital rotation, 24-inch touchscreen, and 42.5-micron focal spot. The TAU 1515 adds capabilities not found on the TAU 1512: a 15cm x 15cm square detector (vs 15cm x 12cm rectangular) and pulsed fluoroscopy. The TAU 1512 uses continuous fluoroscopy only and has a rectangular detector with higher pixel density (75 vs 99 microns). For practices that prioritize dose reduction or cover pediatric populations, the TAU 1515 is the stronger fit. For practices focused purely on image resolution and do not need pulsed capability, the TAU 1512 is the alternative.

How does the TAU 1515 pulsed fluoroscopy compare to the Orthoscan FD Pulse?

Both systems offer pulsed fluoroscopy at the same five pulse rates: continuous, 30, 15, 7.5, and 2 pps. The core dose-reduction capability is equivalent. The differences are in platform generation: the TAU 1515 runs OrthoTouch 2.0 on a 24-inch display with a 15cm x 15cm square detector and Windows 8.1. The FD Pulse uses the original OrthoTouch on a HD display with a 15cm detector and Windows 7. Orthoscan has ended manufacturer support for the FD Pulse; the TAU 1515 is current-generation with active OEM support. For new purchases, the TAU 1515 is the current pulsed fluoroscopy option.

How much does a refurbished Orthoscan TAU 1515 cost?

Pricing on certified-refurbished Orthoscan TAU 1515 systems is typically $60,000 - $72,000. The price depends on year of manufacture, hours of use, included accessories, and warranty tier. Call (800) 643-2998 or request a quote for current availability and exact pricing.

Minicarm.com is not affiliated with or endorsed by Orthoscan. All product names, logos, and trademarks are the property of their respective owners and used for identification purposes only. Orthoscan TAU 1515 Mini C-Arm pricing, specifications, and availability subject to change. Refurbished mini C-arms are inspected and certified by Minicarm.com under our own quality program, independent of the original manufacturer.